- 1.
HOOK. Attach the yellow
straps around or to a support. The yellow straps have clip hooks on
the ends to clip together to form a loop or attach directly to a support
object. Recommended supports are around are:
Fences, luggage racks of vehicles, trees and eyebolts attached to walls
or structures.
- 2.
PULL. Pull out on the
handle of the SportsShade housing until the awning material is completely
extended and can pull out no further. SportsShade must be completely
extended to be held in place by the guy lines.
- 3.
SWING. Pull down on
the legs, which are held horizontal by black clips and swing them vertically
into place. The legs should be perpendicular to the housing for correct
use. The SportsShade housing and legs should be placed at a slight incline
to keep the awning extended while placing the guy-lines with stakes
(See picture 4 on the box).
-
4. STAKE. One person should hold the SportsShade
upright until the guy lines have been staked down. Pull each guy line
until it is fully extended at an approximate angle of 45 degrees from
the support legs. Place the stake perpendicular to the ground and drive
it into the soil until the collar is touching soil.
Do not use stakes in sand or mostly sandy soil. It is recommended to
use SportsShade weight bags (sold separately) when setting up on concrete
or sandy areas. Please note that neither Inventive Ideas(tm) or DogLogic(tm)
is not responsible damage or injury caused by any modification made
to the SportsShade.
|
